Choose market region

EC209-R

Rotator

When only rotation is needed, with no tilt function.

The rotator: Supplied with hoses, quick couplings and electrical installation. Can be used on all excavators and backhoes.

Quick coupler: We offer most of the quick couplers available on the market.

Control systems: Choose between several different control systems based on your machine’s characteristics. The rotators can be fitted with engcon’s Microprop proportional control system to provide a real advantage, as it gives you stepless control, maximum precision and remote support via the mobile network.

Electrical system: Can be adapted to 12 V or 24 V electrical systems.

Extra functions: Integrated grab.

Models with S45, S50, S60 and S70 will be successively supplied with the Q-Safe safety coupler as of 2014–2015.

  • Width A: 250 mm
  • Width B: 250 mm
  • Construction height C: 425 mm
  • Length D: 561 mm
  • Weight: 267 kg
  • Flow requirement: 60 l/min
  • Working pressure: 22 MPa
  • Base machine weight: 6–9 t

System engcon

What is most important for you?

  • Profitability

    System engcon, centred around the tiltrotator, saves both time and fuel.

  • Safety

    Fewer machine transits and less need for manual work increases safety at the workplace.

  • Flexibility

    The tiltrotator's ability to tilt and rotate makes the machine a good all-rounder that carries out most tasks with greater precision.

  • Efficiency

    Fewer machine movements and faster jobs mean less wear on the machine.

Read more about Concept engcon

FAQs

What should I consider when deciding my excavator specification?

Despite the increasing popularity of tiltrotators, many excavator manufacturers do not yet sell 'tiltrotator-ready' machines on certain markets. There are two main considerations when buying a new excavator for use with a tiltrotator - dipper length and hydraulics. Ideally, a shorter dipper should be chosen to take into account the build height of the tiltrotator. For example, if the standard dipper length is 2500mm, choose one 2000mm long so that the extra reach resulting from the addition of the tiltrotator still falls within the manufacturer's safe working range and that there is no chance of the bucket or other attachment hitting the cab when fully crowded.

The standard machine hydraulics can often be used for tiltrotator operation, but the machine controls may not be sufficiently sophisticated to fully exploit the capabilities of the attachment. Tiltrotators are usually supplied with so-called fully proportional control systems. These allow the hydraulic power to be gradually increased according to the needs of the attachment and the task to be completed, for example when pouring type 1 or concrete into a narrow area or using grabs or pallet forks. Non-proportional, or on/off systems which are generally button-operated do not allow the delicacy of control necessary for many tiltrotator operations.

If the excavator has two dual-acting proportionally controlled hydraulic circuits, then basic tiltrotator operation should be possible using the excavator's controls. A third, non-proportional circuit will be required for the tiltrotator hitch. Where a single, dual acting circuit is fitted, it is often more cost-effective to use engcon's DC2 control system which manages the hydraulic switching and flow proportionally within the tiltrotator, rather than have additional circuits fitted.

Can I use my existing buckets?

The pin geometry on your existing buckets is unlikely to be compatible with the S-type coupler fitted to standard tiltrotators. Choosing a Unisafe/PUP coupler to allow you to use your existing buckets is likely to be a false economy for the simple reason that tiltrotator (s-type) buckets are designed for tiltrotator digging. Not only is the angle of the bucket optimised for tiltrotator use, but the bucket geometry (shape, size, etc.) is specific for rotational and angled digging and grading. The saving you make by choosing the S-type coupler can be re-invested in top bracket adapters to convert your existing buckets and other attachments.

If you are running hydraulic tools, you can also purchase adapter brackets EC-Oil ready, or pre-fitted with EC-Oil and thus convert your current hydraulic tools with ease for the S-type coupler.

404 - Page not found

We couldn't find the page you're looking for.

An error has occurred

Try downloading the page again to see if the error recurs.

An error has occurred

We could not connect you to the Internet